Categories
Contact Us

Anhui Yawei Machine Tool Manufacturing Co.,Ltd

China AHYW CNC Press Brakes, Guillotine Shearing Machines and CNC Metal Fiber Laser Cutting Machines Manufactures, suppliers, factory in China
Add: Pingqiao Industrial Area, Bowang, Maanshan, Anhui, China
Email: export@ahycnc.com
Cel: 0086-15955558219, 15955559207
Fax: 0086-555-2325560
Skype: amyxu851101
WhatsApp:008615955558219
www.ahycncs.net

Recommend routes:
1. Airport: We can pick up you at Nanjing Lukou International Airport , it will take half an hour by car from that airport to our company.
2. G-Train station: We can pick up you at Nanjing South station. It will take about 50 minutes from this station to our company by car.

News

Home > News > Content

Brake Hydraulic System Without Pressure

Edit: Anhui Yawei Machine Tool Manufacturing Co.,Ltd    Date: Apr 09, 2016

Quickly slow the slider and pause time too long.

1, check that the oil level in the tank is too low, fluid is not flooded, and fast forward on the cylinder when insufficient liquid-filled suction-induced liquid-filled cavity. Above tank oil liquid can be added to the liquid-filled above the 5mm, fluid-filled porous completely flooded.

2, check whether the fast forward speed too fast, causing insufficient filling. Reasons as above can be modified by reducing the fast speed of the system parameters.

3, check whether the filling valve is fully open, if it is because of oil contamination, the filling valve valve core activities not flexible card lag caused by insufficient liquid-filled. Need to clean the filling valve replacing the valve freely.

Fault: slider return to normal faster into normal, manual can't slow down, folded plate and weak.

1, check the control the hydraulic control circuit of "two four-way" valve is working properly, if it is caused by filling valve is not closed, so that the upper Chamber and the fuel tank filled with liquid is communicated, build pressure. Lead the valve is not working properly because there is no power or is stuck.

2, check whether the filling valve is stuck, and if so, please clean the filling valve, reinstall, and flexible to make the valve core.