How to manufacture different poles for your project? Light street poles, mast poles, electrical poles, The production line not only applicable to street lamp poles, but also include production of marker poles, flag poles and high pole lamps. The main production is as follows:
1. Simple rolling and flattening production line; The system is mainly composed of uncoiler, side guide device, stranding machine, plate shearing device, stacking bar and electrical system. It is especially suitable for the leveling of street lamp poles, flag poles and other pole equipment.
2. Sheet plate shearing machine; It is applicable to the longitudinal shearing processing of long shearing plates, and the length of shearing plates can be adjusted . With high labor productivity, the plate to be sheared is pressed on the traveling device by hydraulic steel, and the circular knife is rotated to shear, and the plate is sheared along with the traveling device. When pressing, the plate is tilted according to the required size, and the tapered plate can be sheared. It is especially suitable for cutting the boards of lamp poles and flag poles.
3. CNC Tandem Press brake; or called 2 sets of sheet bending machine; This equipment is composed of two bending machines, which are linked in two stages to achieve synchronous work. It is equipped with different lamp pole molds randomly, and can be used to produce street lamp poles, flag poles, high pole lamps, etc. When it is used in the production of conical lamp poles, install conical molds, bend with multiple knives, bend the last knife in the middle, and a conical lamp pole will be formed. Then pull out the lamp pole with the lamp pole rolling machine; When it is necessary to produce polygonal lamp poles, marker poles and high pole lamps, install a special polygonal mold, bend with multiple knives, and finally bend the middle knife to form a multi deformed lamp pole, and then pull out the lamp pole with a sucker rod reeling machine.
4. Automatic seam welding machine; This equipment consists of the main machine head, the traction bed and the waiting row cover. The traction bed is made up of the traction collet on the moving trolley to clamp the steel big head trolley for movement, and the steel rod is driven to move from the small head to the big head. The big end of the steel rod moves at a constant speed under the grip of the six grippers on the main machine head. Under the hijacking of the loose steel rod trolley, the guide wheel on the head realizes automatic butt welding. At the same time, the welding machine starts to undulate welding, This equipment adopts automatic welding and automatic recovery of welding flux. The welding seam is uniform, continuous and beautiful, with strong penetration. The seam welding is formed at one time. The welding efficiency is high, the speed is 23 meters/minute, which is three times of gas shielded welding. The cost is lower than gas welding. It is currently the equipment with the fastest welding speed, good effect and lowest price in the domestic lamp pole industry. This equipment is mainly used for welding street lamp poles and flagpoles. Generally, it is not used for marker poles and high pole lamps with large poles. This equipment is generally not used for marker posts and high pole lamps with large poles.
5. Mechanical seaming machine; This machine is a special equipment for seaming high pole lamps and marker posts after bending. The machine is driven by the turbine and worm to close the seam. It can be operated by linkage or single action. It can be carried out with manual electric welding with high efficiency. After the spot welding is finalized, the machine can be welded on the semi-automatic welding production line. At the same time, the marker post and the high pole lamp can be rounded.
6. Semi automatic welding production line; This machine does not emit light and has fast welding speed. It is suitable for various rods. Manual adjustment is convenient and fast. The weld seam is uniform, continuous and beautiful, and has strong penetration. It can be formed at one time at a speed of 1-3 meters/minute, which is 3 times as fast as gas shielded welding. It is a marker post after mechanical seam seaming machine and a necessary equipment for welding high pole lamps.
7. Steel pipe straightening machine; This equipment is simple and compact in structure and convenient. During specific operation, the steel rod can be manually placed on the press mold, held by a person, and pressed by a button. The straightness of the steel pole is controlled by manual visual inspection with high efficiency. The equipment can straighten any shape of road light pole, marker pole, flag pole and high pole lamp, with the head rounded.
According to the design requirements, the head of some street lamp poles needs to be bent, that is, the self bending arm street lamp pole, which is composed of the main board and the bending die. Two sets of moulds are equipped. The straight mould is cleaned by the reducer, and the steel pipe pressed on the circular mould is bent along the circular mould. The operation is simple, without heating and filling, the upper part of the tapered street lamp pole can be bent directly. Economical and affordable is a necessary equipment for street lamp pole manufacturers.
When execute the following all procedures, a street lamp pole is basically formed, then the lamp pole door is cut with a plasma cutting machine or a fiber laser cutter, and the circular or square flange is welded according to the drawing requirements. In China AHYW Yawei Factory, we can design all kinds of poles forming molds for your poles production line, email us for fast and professional sheet metal cutting&bending solutions.
