Italy made Rolleri Press brake Clamp system
The new clamping ROL200 for Punches! The new patented system enables manual, pneumatic or hydraulic vertical clamping of your top tools. The special features are the enormously simple handling and the surprisingly low price, which guarantees huge efficiency. It is available as retrofitting as well as original equipment. This new clamping is a revolution in the market of press brake tooling!
ROL200
fast vertical tool change for all Rolleri R1 type punches
can be used without modifying Rolleri R1 type punches
safe and fast tool change
substantial improvement in time consumption and related costs
secure against tool falling down
available in manual, pneumatic and hydraulic models
Mounting: Simply from the bottom into the housing, tighten – DONE!
Disassembly: Untighten, gently lift tool and remove it downwards.
Easy to mount on your press brake.
Modification of the press brake is not necessary.
For Rolleri punches type R1
No modification of the necessary tool
Vertical insertion of the tool
Automatic tool alignment
Anti-fall system
Includes intermediate choice
Versions: pneumatic and hydraulic
ROL 4 press brake clamps
Horizontal tool exchange
Integrated KDS-System
For Standard-Punches Rolleri Type R1. There are no modifications necessary!
Manual Back Clamp standard on both versions
Automatic tool alignment
FAST press brake CLAMP3 - DOUBLE FAST CLAMP3
Thanks to its curved construction, ROL1 CLAMP3 guarantees perfect clamping and alignment of small segments
Ergonomic lever on the clamp to open and close easily
Hardened plate mounted between clamp and intermediate to protect them against wear
Fast mounting system through springs and buttonholes
Made of C45 nitrated
Long life cycle
Manual version
FAST press brake CLAMP1 - DOUBLE FAST CLAMP1
ROL1 can be used on all press brakes with Rolleri R1 type intermediates with standard tang
In order to use the ROL1 System, punches are modified and equipped with spring-loaded ball bearings
Vertical clamping of tools is possible thanks to a row of spring-loaded ball bearings which are also used as antifall system to prevent punches from falling down
A complete mechanical and efficient fast clamping system for press brakes
Productivity and versatility of press brakes is substantially increased
Significant reduction in the set-up times when changing tools
Automatic tool alignment
ROL1 system has been designed for press brakes that mount intermediates max. at 70mm distance to each other. In case the distance between intermediates is bigger, make sure that a minimum quantity of ball bearings is in the clamp.Such quantity depends on the type of the tool and its length
Manual version
EASY press brake CLAMP
No tools modification necessary
Avaiable in 2 versions: single and double clamp
Horizontal Front Tool change
Horizontal Rear tool change (Double Easy Clamp)
Anti-fall System
Includes an intermediate of your choice
Manual Version
