Maintenance of CNC Metal Bending Machine
Bending machine is often used in production, but because of long-term use, CNC bending machine will have various faults, so if daily problems often occur, then your bending machine needs to be maintained at this time, then how much do you know about the maintenance and maintenance of the bending machine? Today, the technicians who specialize in the research and development of bending machines will give you a brief introduction to the maintenance methods of bending machines, so that your bending machines will have a longer life and better service for you.
Fault 1: When the slider changes from fast to slow, it always stops for a long time.
At this time, we will check whether the amount of oil is insufficient, fast forward, it is likely to appear insufficient liquid filling phenomenon, which is due to the suction of the cylinder, resulting in. If so, the height of the oil in the tank can be raised a little, about 5 mm above the filling port is the most appropriate, so that the filling hole is completely covered by the oil; you can check whether the filling is insufficient, possibly too fast, then modifying the parameters can effectively solve the problem; check whether there is dirt in the filling valve, and sometimes the filling valve is polluted by the oil. The valve core of the filling valve is polluted. At this time, clean the filling valve.
Fault 2: The slider works normally in automatic operation, but when operated manually, the folding plate is not strong enough to go down.
Check whether the reversing valve is working properly, it plays a controlling role. If the filling valve is not closed, then the upper chamber and the filling port of the tank are connected, and the pressure can not be formed. At this time, the valve can not work properly. If the valve does not work properly, it may not open the switch or the valve is blocked by pollution.
These are common failures and corresponding solutions. I hope that our explanation can help you.
Now the specifications of the bending machine installed and used by manufacturers are very reasonable. The structure of this equipment is very simple. It is mainly composed of brackets, workbenches and fixtures. When using the bending equipment to process materials, the equipment will complete the bending operation by controlling the pressing plate, so the whole operation process is very fast. Usually, the bending equipment can also be used. In order to effectively improve work efficiency, the application of this equipment also provides many benefits for processing operations. More rarely, during the use of equipment, you can also change the die at will, so that during the processing of different workpieces more flexible, can also achieve better bending effect.
Now people use all steel structure to make the bending machine, so the equipment can prevent impact in the process of use, but also to improve the quality of the equipment. There are also many transmission devices on the bending equipment. Cylinders are installed on both sides of the machine, so that the slider will start running after starting the equipment and process the material. The slider will be completed in combination with parameter setting during operation, which can make the bending operation more accurate.
When using the bending machine, although people can change the die at will, we should pay attention to the operation method when changing the die. We should not change the die during the operation of the equipment. We must stop the operation of the equipment first, and we can change the die after confirming that each device has stopped working.
In addition, when using the bending machine, the adjustment of the stroke is very necessary. Before each processing, the trial processing should be carried out. After the stable operation of the equipment is determined, it can be put into use, so as to avoid the problem of setting and affecting the processing effect.
