Contact Us

Anhui Yawei Machine Tool Manufacturing Co.,Ltd

China AHYW CNC Press Brakes, Guillotine Shearing Machines and CNC Metal Fiber Laser Cutting Machines Manufactures, suppliers, factory in China
Add: Pingqiao Industrial Area, Bowang, Maanshan, Anhui, China
Cel: 0086-15955558219
Fax: 0086-555-2325560

Recommend routes:
1. Airport: We can pick up you at Nanjing Lukou International Airport , it will take half an hour by car from that airport to our company.
2. G-Train station: We can pick up you at Nanjing South station. It will take about 50 minutes from this station to our company by car.


Home > Exhibition > Content

Hydraulic shearing machine purchase and safe operation

Hydraulic shearing machine purchase considerations:

1, when you purchase should try to choose the high degree of automation and easy to control, thus reducing the number of operators and reduce costs;

2, should choose those that are stable, low energy consumption, high thermal efficiency, ensure the quality of dried materials to meet the needs of users;

3, hydraulic shears is considered an important aspect of purchasing of fuel used, you should try to select those suitable for multi fuel drying equipment, which according to the fuel market, adjust, can significantly reduce the cost;

Hydraulic shearing machine for safe operation

One, seriously implement the relevant provisions of the General rules of forging equipment.

Second, implement the following supplementary provisions: (a) carefully before working to:

1, before making the no-load test, you should manually turning a work trip, known to switch on the device. 2, hydraulic equipment, inspection of storage tanks oil volume should be sufficient. After starting the pump check valve, the piping for leaks, pressure should be eligible. Open the air release valve system.

(B) the work seriously:

1, are not allowed to cut laminated sheet, no edge of trim boards, unedged, no shearing and pressing not tight narrow sheets and short.

2, the clearance between the blades should be adjusted according to the thickness of the sheet, but not larger than the thickness of the 1/30. Blades should be fastened firmly, upper and lower plate remain parallel, artificial after adjustment turning test, to avoid accidents.

3, blade of the blade should be kept sharp, such as blade blunt or cracked, it should be replaced immediately.